Hammer Drills and Impact Drills and Their Differences

There are many differences in a lot of different power tools. Two tools that everybody loves are Hammer Drills and Impact Drills. These drills are used for different reasons. Both have there pros and cons in there usages. Hammer drills have more power to it as an impact drill will provide you with more torque. People use these drills for all different reasons. Depending on the manufacture that your drill is from you are able to get a drill in all different sizes and speeds and torque. A lot of drills are no capable to be battery powered as opposed to plugging them into the outlets. There are a few different voltages. They range from 12 volt up to 120 volts. There are many brand names that you can choose form. The list starts with DeWalt, Hilti, Hitachi, Milwaukee, and Makiti. They all have there differences between each manufacture and the differences between hammer drills and impact drills are not so common to always see.

Milwaukee Tools

When using a Hammer Drill it is important that you use the one that will get your job done correctly. There are so many different reasons to use a hammer drill. Whether you are just drilling in to the wall or if you are drilling into the ground there is always a hammer drill that will fit your needs. Its important that when looking for a drill you take a look at your job requirements and see what type of job it will be. A lot of drills are capable to provide you to use any size drill bits that will get you hole to the adequate size. There are safety precautions that you will need to know before you manually use these power tools. Authorized personal only.

Milwaukee Tools

Now as far as Impact Drills are concerned they have a lot of different qualities that will help you attack any type of job you are looking to pursue. From small to large you are able to use a variety of different brand name impact drills and drivers. People now use impact drills as there new screw driver. It's more convenient to use an impact drill/driver as opposed the the old school hand screw driver. The reasoning there is that you are not straining your hand or wrist when tightening a screw. The impact drill provides an easier way for you to do what you need to do whether the job is on a construction job site or just simply tightening the loose screw to your toilet paper rack. It is very easy to use and that is why people are turning to power tools now a days because they are more equipped for the ordinary user and installer. Impact drills also are able to insert different drill bits and spade bits so that you can attack any drilling need tat you need to have done without using a hammer drill.

So when you have a job to do big or small make sure that you choose the power drill whether it's a hammer drill or impact drill that will accommodate your every need. It is very important that you realize the differences so that you can install or fix any task that comes your way!

Hammer Drills and Impact Drills and Their Differences

Milwaukee Tools

Black Friday Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery 2011 Deals

Nov 14, 2011 00:52:46

Click for larger image and other views

>> Click here to update Black Friday prices for Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery <<

Black Friday Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery Feature

Application Versatility: Cuts, Grinds, Sands and Scrapes. Compatible: M12 LITHIUM-ION System with over 25 cordless tools. Accessory Adaptor (Included): Compatible with most competitive accessories
Run Time: RED LITHIUM Battery offer extended run time. Durability: All Metal gear case. Variable Speed Dial: Match speed to application. On board Fuel Gauge: Displays Remaining Run Time
Voltage: 12V; Variable Speed: 12 Settings; OPM: 5,000 - 20,000; Accessory Adapter Included: Yes; On Board Fuel Gauge: Yes; Battery: RED LITHIUM ; No of Battery Included: (2) M12 RED LITHIUM Battery
Charge Time: 30 Min; Length: 10-1/4-Inch; Tool Weight: 2.1 lbs; Shipping Weight: 5.61 lbs
Includes: 2426 M12 Multi-Tool, Adapter, Wood Cutting Blade, Sanding Pad, (5) Assorted Sanding Sheets, (2) M12 RED LITHIUM Battery, 30-Minute Charger, Contractor Bag

Black Friday Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery Overview

Includes 12V Cordless M12 Multi-Tool Kit - 2426-82, Accessory Adaptor, Wood Cutting Blade, Sanding Pad, (5) Assorted Sanding Sheets, (2) M12 REDLITHIUM Batteries, 30-Minute Charger, Contractor Bag

SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! Milwaukee 2426-22 M12 Cordless Multi-Tool Kit, 2 Battery Black Friday and Cyber Monday 2011 Deals

Gaming Keyboard

Background Check for Staff at Milwaukee Schools a Must

Milwaukee schools will be conducting more thorough background checks on staff in the aftermath of a former teacher pleading guilty to four counts of sexual assault on a teenage student. That action is both reasonable and appropriate, in my view. In fact, Milwaukee administrators should be commended for dealing with the situation in this manner.

Milwaukee Tools

All Staff Working at Milwaukee Schools Need to be Thoroughly Screened

Milwaukee Tools

When it comes to the safety of students, we can't afford to wait until an incident happens before addressing the issue of student safety. Long gone are the days when parents could send their children to school and assume that they would be safe...especially from their teachers.

Adults with an interest in children for sexual purposes seek out their company. It's just the way it is. While Milwaukee schools are no more likely than schools in other jurisdictions to have a pedophile on staff, it would be naive to assume that it couldn't happen. Conducting a thorough background check on all people applying for jobs means that all applicants are treated equally, and no person is singled out for further investigation.

Background Checks for Milwaukee Schools Only Tell Part of the Story

Unfortunately, a background check on job applicants will only reveal whether that individual has ever been charged with a crime. In these types of incidents, there may be many victims over a number of years before anyone reports the inappropriate activity. Background checks are a good idea but they don't provide information about what a person may do in the future.

Everyone attending the Milwaukee schools needs to learn that they should be looking out for each other. Students who are the objects of unwanted attention from an adult, whether that person is on staff or not, need to know that they can come forward and report these incidents. These young people need to have confidence in the fact that they will be believed and that the matter will be investigated thoroughly.

People who have preyed on children in the past did so in the knowledge that their actions would be conducted in secret and that the victim was not likely to be believed. This is no longer the case, and by choosing to screen staff members more thoroughly, they are making their learning environment safer for everyone.

We may not be able to stamp out inappropriate behavior on the part of adults toward children, but it will be a lot more difficult for these incidents to happen at Milwaukee schools from now on. Growing up is difficult enough without having to deal with adults with an inappropriate agenda, and Milwaukee schools are definitely on the right track here.

Background Check for Staff at Milwaukee Schools a Must

Milwaukee Tools

Black Friday Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw 2011 Deals

Nov 13, 2011 03:15:44

Click for larger image and other views

>> Click here to update Black Friday prices for Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw <<

Black Friday Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw Feature

Tool free shoe bevel with positive stops allows for quick and accurate shoe adjustment
Maximum 45-degree bevel in either direction with detents at 0, 15, 30, and 45-degrees
5-position orbital cutting offers versatility for application specific cutting
Over-molded grip with variable speed trigger provides optimal control for cutting a variety of materials
Non-marring shoe protects work surface from damage

Black Friday Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw Overview

The 2645 20 delivers accuracy, versatility, and ease of use. The 5 position orbital setting offers more cutting versatility than any other cordless jig saw on the market. This allows the user to select the type of cut or speed specific to their applications. For ease of use, the tool free shoe bevel allows for quick an accurate shoe adjustments, while the Quick Lok blade clamp (model
No. 153) provides fast and easy blade change.

SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! Bare-Tool Milwaukee 2645-20 18-Volt M18 Jig Saw Black Friday and Cyber Monday 2011 Deals

Lg Lcd Led Tv Cordless Milwaukee

Harley Davidson History

In 1901, the 21 year-old William S. Harley had created the blueprint of an engine that was designed to fit in a conventional bicycle. Two years later, William together with his friend Arthur Davidson started and developed a one-cylinder engine that was installed on a conventional bicycle during that time. However, this motorized-bicycle was proved to be incapable of climbing through the Milwaukee hills without pedal assistance. Harley and Davidson developed further their motor after that experience.

Milwaukee Tools

Immediately, they have created a bigger engine (405 cc or 24.74 cubic inches) that was become the very first and real Harley-Davidson motorcycle. Meanwhile, the first Harley-Davidson factory was in a 10 x 15-foot wooden shed. The two friends were helped by Arthur's older brother Walter.

Milwaukee Tools

After a year, the Harley-Davidson motorcycle entered its very first motorcycle race at Milwaukee.

The first years came in so quickly for the company that after 3 years, Harley-Davidson motorcycle production was transferred at Chestnut Street (that was later become Juneau Avenue). This is still the Harley-Davidson headquarters up to this time.

In 1907, William received a degree in mechanical engineering at University of Wisconsin. This helped them to development of better Harley-Davidson engines in the future. The same year also provided them a much needed factory expansion for the growing motorcycle demands. The year 1907 introduced the 45-degree V-Twin engine which has become the sole Harley-Davidson engine for a very long time.

Over the years, the company has gained so much popularity that was converted into sales output. During the First World War, Harley-Davidson was commissioned to provide more than 20,000 units for military use. The story of the Second World was the same for the company. They produced thousand upon thousands of motorcycle.

Before the entry of the 70's, AMF or the American Machinery and Foundry bought Harley-Davidson. Policies had changed that resulted to labor strike and substandard bikes. The popularity and reputation of the company was severely damaged.

In the 80's, it was sold to a group of investors headed by Willie G. Davidson and Vaughn Beals. The provided innovations such as the introduction of the "Sturgis". The costumers began to return and the company had seen clearer promise.

Since then, the popularity of Harley-Davidson motorcycles was unquestionable. They regained their leadership in motorcycle industry as they create a unique line of motorcycles, different from the conventional Japan made. Now, after more than a hundred years of existence, Harley-Davidson motorcycles have become an attraction in every road around the world.

Harley Davidson History

Milwaukee Tools

Black Friday Bare-Tool Milwaukee 2680-20 18-Volt M18 4-1/2-Inch Cut-off/Grinder (Tool Only, No Battery) 2011 Deals

Nov 12, 2011 06:02:08

Click for larger image and other views

>> Click here to update Black Friday prices for Bare-Tool Milwaukee 2680-20 18-Volt M18 4-1/2-Inch Cut-off/Grinder (Tool Only, No Battery) <<

Black Friday Bare-Tool Milwaukee 2680-20 18-Volt M18 4-1/2-Inch Cut-off/Grinder (Tool Only, No Battery) Feature

4-pole motor delivers maximum power when cutting or grinding
Overload protection prevents damage to the tool and battery in abusive situations
L-shape vents keep debris from entering the tool and damaging internal components
Tool free, burst resistant guard allows for quick, easy guard adjustments
Tool only (batteries not included)

Black Friday Bare-Tool Milwaukee 2680-20 18-Volt M18 4-1/2-Inch Cut-off/Grinder (Tool Only, No Battery) Overview

The M18 Cordless 4-1/2-inch cut-off/grinder provides speed, durability and ease-of-use to the industrial user. Built with a Milwaukee 4-pole motor, the 2680-20 delivers maximum power when cutting or grinding. It's the only cordless cut-off/grinder in the market to provide the user-preferred paddle switch for comfort and ease-of use when operating in various positions. The L-shape intake vents protect the cut-off/grinder by keeping harmful debris from entering the tool and damaging internal components. It also has up to 35 percent faster cutting speed, and up to 50 percent more cuts on a single charge. The 3-position side handle provides optimal control and versatility while overload protection prevents damage to the tool and battery in abusive situations.

SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Bare-Tool Milwaukee 2680-20 18-Volt M18 4-1/2-Inch Cut-off/Grinder (Tool Only, No Battery) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! Bare-Tool Milwaukee 2680-20 18-Volt M18 4-1/2-Inch Cut-off/Grinder (Tool Only, No Battery) Black Friday and Cyber Monday 2011 Deals

Rotisserie Oven

3D Reliefs for CNC Routers Instead of G-Code, to Make Amazing Artcam Reliefs for Your CNC Machine

You have now finished your DIY CNC router, or you went out and bought one. You've been waiting years for this. and now it has finally happened. But by now your girl friend is jealous because you don't spend enough time with her, or worse your wife is pissed off over all the money you have spent on this funky looking contraption. You think to yourself I'll show her, I'll go out to the shop or the basement and I'll make a thingumabob that will really impress her. But first you check the internet to see how the big boys do it, just to find a small handful of cheesy G-Code files that are compatible with your CNC router software. Even after weeks and weeks of searching you can't find anything that will impress your lady or your neighbors, now what?

Milwaukee Tools

Let me tell you that your not alone. I've been in the business for more than 15 years and I have heard it all. In this article I will explain all the ins and outs that the big boys use. All their tips and tricks that they wont tell you.

Milwaukee Tools

Forget the G-Code, this is just a waste of time. In this day and age you need to think like the big boys do. Your end file WILL be G-Code, however you don't need to know anything about it. The Big Boys will have a 3D modeler design and draw the 3D image, once its drawn they will convert this to a file type like .STL then load that into a CAM program that can generate G-Code for the type of CNC router software they use. I know this sounds complicating, but I will show you a few shortcuts.

Unless you need a VERY specific 3D image you wont need to draw much of anything. There is a website that you can purchase the 3D Reliefs (3D Images for CNC routers) from.

Your router spindle motor collet, needs to be able to accept Dremel bits. I can't stress enough on this. I don't care how you do it, just do it. Unless you are making huge signs or pieces you will need to use Dremel bits. This is because the smaller the piece, the smaller the cavities will be, and unless you have super small bits, all those small details wont show. Dremel bits are cheap, tried and true replacements for those very expensive bits that the Big Boys use.

The CNC router control program that I suggest is Mach3 CNC. The CAD/CAM software that I suggest is Artcam. This is a remarkable piece of software that you can't do without. This program will be able to export the G-Code to your CNC router program. But don't be fooled, It will do a thousand things more than just that.

Let's look into Artcam a bit more here. You first Purchase a few 3D Reliefs from a website, then you will load and scale this into Artcam, then you will choose tool paths, and in tool paths you will need to create three to four tool paths with different size bits. Your first bit will more than likely be 1/2 inch to 3/8 inch ball nose depending on the size of the model you will be making. then down to 1/4 inch ball nose, then down to 1/8 inch ball nose then down to around a 106 Dremel bit. You will need to configure each bit in the tool bit database. The step over percentage is rather tricky, I have found that around 9% is my sweet spot. It's a bit slow, but I don't have to sand so much, but I save this small step over for just the Dremel bit, the others can be around 40%. And unless your router and bits are like superman you will more than likely have a feed rate of around 100 inches per minute. less than 40 will burn up your bits. more than 200 will start to chip up wood and cause cavities. With more expensive bits, the faster you can go, but we wont get into that in this article. If you have a variable speed spindle motor or router then you will be able to control the speed to save your bits from burning up. In Artcam you can set the spindle speed for each bit. Artcam can get a bit tricky and confusing. I'm sorry but I can't get into every little detail in this article. Artcam is just to complex to go over everything, so lets keep it simple.

So now we have three or four tool paths. Depending on your CNC router, you might be able to create one big G-Code with all three or four bits in it. But lets keep it simple and create three or four G-Codes with the name of the bits. So you will select the tool path and select your G-Code CNC requirement file format and for example save as "half-inch ball nose.cnc" in a directory with the name of the piece you will be making, because there will be several tool paths inside of this directory.

Once you have all the tool paths saved into your directory you will copy this dir into your CNC router controller PC. and load the first G-Code file into your CNC router program. One by one until you have finished the Dremel bit. Now your ready to do some showing off.

3D Reliefs for CNC Routers Instead of G-Code, to Make Amazing Artcam Reliefs for Your CNC Machine

Milwaukee Tools

Black Friday Milwaukee 48-11-2402 M12 Xc Battery Pack 2011 Deals

Nov 11, 2011 08:37:44

Click for larger image and other views

>> Click here to update Black Friday prices for Milwaukee 48-11-2402 M12 Xc Battery Pack <<

Black Friday Milwaukee 48-11-2402 M12 Xc Battery Pack Feature

High Current Discharge - Increased power and performance
Rubber Over-Molded Base - Protects delicate surfaces from marring
Sturdy Base - Allows M12 tools to easily stand
Compact and Lightweight - Smaller and Lighter than NiCd batteries
M12 Compatibility - Compatible with most M12 tools and electronics (not compatible with 2320 M12 Plumb Laser and 2290 SUB-SCANNER M12 Cordless Detection Tool )

Black Friday Milwaukee 48-11-2402 M12 Xc Battery Pack Overview

The Milwaukee M12 XC High-Capacity Lithium-Ion battery provides 2X the run time and increased performance in Milwaukee M12 tools. At only 2 1/2in. wide and 3 1/2in. long, the battery provides a durable and stable base for tools to stand upright. Compatible With: All M12 tools except plumb laser and sub-scanner, Battery Amp/Hour: 2.8, Battery Charging Time (hrs.): 1, Battery Type: Li-Ion, Volts: 12, LED Indicators: No, Thermal Protector: Yes, Low Battery Indicator: No, Impact Resistant: Yes, Environmentally Friendly: Yes, Pass Through Plug: No, Portable: Yes, Items Included: Battery

SAVE NOW on Black Friday offers below!

Available In Stock.

This Black Friday Milwaukee 48-11-2402 M12 Xc Battery Pack ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! Milwaukee 48-11-2402 M12 Xc Battery Pack Black Friday and Cyber Monday 2011 Deals

Android Wifi Tablet

Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Special Price!!! Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Nov 10, 2011 10:25:24

Click for larger image and other views

>> Click here to update Cheapest prices for Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) <<

Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) Feature

Heavy-Duty Magnesium Guards for maximum durability and On-board fuel gauge displays remaining battery charge
Ergonomic, compact and lightweight design with soft-grip handle for operator comfort
Electronic brake stops blade quickly and Aircraft aluminum shoe provides greater accuracy
Includes: 18-Volt XC Circular Saw, 24T Carbide Blade

Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) Overview

2630-20 Model Code: AB (part# 2630-20) This item features: -Aircraft aluminum shoe provides greater accuracy. -Electronic brake stops blade quickly. -Ergonomic, compact and lightweight design with soft-grip handle for operator comfort. -Heavy-duty magnesium guards for maximum durability. -On-board fuel gauge displays remaining battery charge. -Voltage: 18.00 V. -Batt. Cap.: 2.800 A-h. -Batt. Type: Lithium-Ion. -Blade Diam: 6 1/2 in. -Speed: 3500 rpm. -Arbor Diam: 5/8 in. -Cutting Cap.: 2 1/8 in (90 crosscut) [Max], 1 9/16 in (45 bevel) [Max]. -Bevel Cap.: 50 [Max]. -Control Type: On/Off. -Handle Type: Top D-Handle/Top Palm. -Price is for 1 Each. Model Code Model Description AAIncludes:1-Hour Charger, Contractor Bag, Rip Fence Guide, (2) XC Batteries, Framing Blade ABIncludes:Rip Fence Guide

SAVE NOW on the special offers below!

Available In Stock.

This Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) Black Friday and Cyber Monday Deals

Water Resistant Watches Optoma Home Theater Projector Marine Two-Way Radios

Power Tools And Their Safety Hazards For Your Health

As much as women love their jewelry and perfumes, men love their power tools. Having the latest and coolest tool that is most technological advanced is a dream of pretty much every modern man. However it is also true that there are countless accidents every year due to careless use of these tools. This is why power tool safety should be a main concern when doing home renovations or other projects using them.

Milwaukee Tools

There are countless types of accidents that can happen when using various power tools, such as cuts, scrapes, pinches, punctures, electrocutions, amputations and ultimately death. Particularly construction workers are affected by serious injuries using these tools because they didn't understand the safety issues around them.

Milwaukee Tools

All tools have safety guards that one needs to be aware of, no matter of the type of gadget used. While some tools are able to cause smaller damages, others can seriously affect and impact the health of the individual with careless handling. This is why when using any tool, you need to be aware of its particular safety precautions to be able to prevent any accidents.

Also using common sense is required here. If you see that a tool has very sharp teeth, it is understood that you won't use your fingers near these teeth. Also you should not use your fingers near the flames of welding torches. While these are indeed common sense pieces of advice, you'd be surprised to hear of the many such accidents that happened simply because people were extremely careless when using them.

Luckily each tool comes with its own set of usage instructions. There are also various guidelines given by the Occupational Safety and Health Administration (OSHA) that everyone should follow when using power tools to avoid accidents of any kinds.

It is important to first inspect the item. It should have a recent electrical test label, meaning that it has passed recently all sorts of safety tests and inspections. Make sure that the cord is not broken, loose or otherwise frayed. Once the tool passed your own inspection as to all parts being intact, make sure to learn how to actually use it appropriately based on the user manual.

As soon as you've used the piece, make sure to unplug it right away. Many accidents happened because people pressed the start button while their finger was on the teeth of the tool and the finger got cut off in the process, simply because the item was still powered up.

If if comes with a safety switch or guard in place, as soon as you stopped using it, put the guard up so you don't accidentally start it when it should be off.

Power Tools And Their Safety Hazards For Your Health

Milwaukee Tools

Special Price!!! Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Nov 09, 2011 13:13:27

Click for larger image and other views

>> Click here to update Cheapest prices for Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) <<

Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) Feature

Heavy-Duty Magnesium Guards for maximum durability and On-board fuel gauge displays remaining battery charge
Ergonomic, compact and lightweight design with soft-grip handle for operator comfort
Electronic brake stops blade quickly and Aircraft aluminum shoe provides greater accuracy
Includes: 18-Volt XC Circular Saw, 24T Carbide Blade

Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) Overview

SAVE NOW on the special offers below!

Available In Stock.

This Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! Bare-Tool Milwaukee 2630-20 Bare-Tool 18-Volt 6-1/2-Inch Circular Saw (Tool Only, No Battery) Black Friday and Cyber Monday Deals

Jar Opener

Top 10 Power Tools

Looking for power tools that will make your life a whole lot easier? Well, here's help with a list of the Top 10 Tools you just can't do without!

Milwaukee Tools

Hitachi C10FCE2 10-Inch Compound Miter Saw: It is a great investment if you are professional woodworker or craftsman. Hitachi NT50AE2 3/4 to 2-Inch by 18-Gauge Brad Nailer: This is a great buy for those people who involve themselves in a lot of cutting work. This is the very best miter saw money can buy. Dremel 750-02 Minimite 2-Speed Cordless Rotary Tool: This is a handy tool that comes with 4.8 volts of power. It is lightweight and comes with a guarantee of 2 years. Fein MultiMaster FMM 250Q Top: This is a tool that is multi- tasking, as the name itself suggests. It can well be used by an average handyman or someone who needs power tools to use professionally. Rockwell RK5102K Sonicrafter Deluxe: With this you can make bevel cuts, precision cuts and every other cut you can think of easily. Dremel 761-03 Cordless Pet Nail Grooming Rotary Tool: This is a pet grooming tool that is functional and efficient. Skil 2372-01 Power Wrench: This is a power wrench that can accomplish almost all tasks with ease. Weller WES51 Analog Soldering Station:Another great tool you can't do without. Milwaukee 2601-22 Compact Drill:Not much needs to be said about the usefulness of a good power drill, is there? Makita LCT300W 3-Piece Compact Cordless Combo Kit: A great kit, if you want a set of tools together.

Milwaukee Tools

Top 10 Power Tools

Milwaukee Tools

Special Price!!! Milwaukee 2410-22 M12 12-Volt 3/8-Inch Drill/Driver

Nov 08, 2011 15:52:27

Click for larger image and other views

>> Click here to update Cheapest prices for Milwaukee 2410-22 M12 12-Volt 3/8-Inch Drill/Driver <<

Milwaukee 2410-22 M12 12-Volt 3/8-Inch Drill/Driver Feature

2-speed (0-1,500/0-400) all metal gear box, up to 35% faster drilling and fastening
Delivers 250 in/lbs of torque
3/8-inch single sleeve ratcheting metal chuck, increased bit retention and durability
Portable tool belt portable only 2-1/2 pounds and 7-3/8 inches
Integrated LED and fuel gauge increases productivity and decreases frustration

Milwaukee 2410-22 M12 12-Volt 3/8-Inch Drill/Driver Overview

The Milwaukee M12 Drill/Driver has the power to drive the majority of common small fasteners, and the run time of full day screw driving without recharging. The compact size allows the users to work in tight places for increased convenience.

Milwaukee 2410-22 M12 12-Volt 3/8-Inch Drill/Driver Specifications

Ideal for HVAC contractors, metal fabricators, woodworkers, and more, the Milwaukee 2410-22 M12 12-Volt 3/8-Inch Drill/Driver provides two speeds for fast drilling and fastening, a compact, portable design, and an integrated LED and fuel gauge for increased productivity and decreased frustration. It's ideal for a range of applications in both sheet metal and wood.

2410-22 M12 Cordless 3/8" Drill Driver
Voltage	12V
Speed	2 Speed
No Load Speed	0-400/0-1,500 RPM
Torque	250 in-lbs
Chuck Type	3/8"
Batteries	M12 LITHIUM-ION Batteries
Charge Time	30 minutes
Length	7-3/8"
Tool Weight	2.5 lbs

2-Speed (0-1,500/0-400) All Metal Gear Box provides up to 35% faster drilling/fastening and Milwaukee durability.

250 In./Lbs. of Torque for Fast Driving and Full-Day Runtime
The 2410-22 offers a two-speed (0-1,500 and 0-400) durable metal gear box to provide up to 35 percent faster drilling and fastening than the competition. Its powerful motor delivers 250 in./lbs. of torque--25 percent more than comparable models--for fast, efficient results when driving most small fasteners, as well as the runtime of full-day driving without recharging.

Integrated LED and Fuel Gauge increase productivity and decreased frustration.

To withstand heavy-duty jobsite conditions and tasks, the 2410-22 is the only tool in its class with a 100-percent metal 3/8-inch single sleeve ratcheting and locking chuck for maximum durability and bit grip.

Also, the 2410-22 is easy to handle and hold, thanks to its lightweight and compact size. Measuring just 7-3/8 inches and weighing only 2.5 pounds, the 2410-22 is the perfect size for your tool belt and comfortable, all-day use.

For added convenience, and to ensure user-friendly operation, the 2410-22 features a clear, bright LED and an on-board fuel gauge so you'll always have power when you need it.

Reliable, long-lasting LITHIUM-ION power is just one part of a full feature set.

M12 Lithium-Ion Power: Compact, Lightweight, and Dependable
Cordless power frees you from the cost and waste of disposable batteries and the hassle of setting up and using manual tools, but a cordless tool is only as reliable as its battery--that's where M12 LITHIUM-ION batteries come in. You can trust the 1.4-amp-hour lithium-ion battery that powers each Milwaukee M12 tool to deliver long runtimes and fade-free power. Lithium-ion batteries will also offer long battery life, so you'll save money by avoiding replacements.

Since lithium-ion batteries are significantly smaller and lighter than competitive NiCad batteries, they play an integral role in making Milwaukee's compact M12 tools ergonomic, comfortable to use, and easy to maneuver while you work.

Plus the M12 LITHIUM-ION battery charger delivers fast, 30-minute recharges, so you can be sure that your tools will be ready to use when you reach for them.

M12 Series Tools: Innovative, Portable, and Easy to Handle
Launched in 2008, the M12 series from Milwaukee offers compact, lightweight tools that are easy to transport and easy to maneuver on the job. Innovative designs that target application- and trade-specific performance allow M12 tools to live up to Milwaukee's reputation for durability and heavy-duty construction while remaining smaller, easier to handle, and more versatile than many competitors' tools.

About the Milwaukee Electric Tool Corporation
In 1924 Milwaukee Electric Tool introduced the Hole-Shooter, the first lightweight, portable, one-handed 1/4-inch capacity drill, and the company has been dedicated to producing innovative, heavy-duty electric power tools that meet the needs of professional users ever since.

Milwaukee's product line has grown to include more than 500 tools and over 3,500 accessories. Milwaukee uses state-of-the-art technologies and sophisticated manufacturing techniques to ensure that quality is built into each of its tools, resulting in durable and reliable professional products.

Warranty
This product is backed by a one-year warranty that protects against defects in materials or workmanship. M12 LITHIUM-ION batteries are backed by a two-year battery warranty.

What's in the Box
Drill/driver, (2) 12-volt battery packs, charger, and case.

The Milwaukee M12 line offers innovative solutions in power, productivity, and portability.

SAVE NOW on the special offers below!

Available In Stock.

This Milwaukee 2410-22 M12 12-Volt 3/8-Inch Drill/Driver ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! Milwaukee 2410-22 M12 12-Volt 3/8-Inch Drill/Driver Black Friday and Cyber Monday Deals

Vizio 47 Lcd